 |
The Net Media SCM1 utilizes a black-and-white CCD (charge-coupled device) image sensor and a 3.6-millimeter fixed lens. This unit achieves a resolution of 350 horizontal TVL (TV lines), and can receive a picture down to a minimum illumination of 0.7 Lux. This camera features video and power wires that are fed through the housing arm and connect behind the base, keeping them out of sight and away from the elements. The output of the SCM1 is a television channel that can be distributed via a cable distribution system to all of the televisions in the home, meaning no monitor is required. For its output the Net Media SCM1 uses an F-connector, and operates via an RG59, or RG6 or better connection cable. This unit runs on 12-volts DC power supplied via its included cable, and uses a digital crystal PLL (phase-locked loop) modulation method.
Technical Features:
About Surveillance Camera Technical Features
Lux rating is the measurement used to indicate how sensitive a camera is to light, and stands for the level of light reflected off a piece of paper by a candle from one meter away. Thus a sensitivity of three Lux would mean a camera could generate an acceptable picture of a piece-of-paper-sized object that was illuminated by the equivalent of three candles from one meter away. The lower the Lux level, the better the camera's ability to work in low-light conditions. The camera's resolution should be greater than or equal to the resolution supported by the system's recorder or monitor. The S/N, or signal to noise ratio, is an important measure of a camera's quality. A poor camera, low-light conditions or poor wiring causes "noise" which consumes processing power and disk space. A camera with a wide dynamic range is ideal, especially for recording areas in which both indoor and outdoor light are present. CCD (charge-coupled device) sensors provide high-quality images that are less susceptible to noise. CMOS (complimentary metal-oxide semiconductor) sensors offer less image quality, but are usually more cost-effective and energy efficient.
1.) B/W CCD image sensor camera and digital RF modulator in one;
2.) Heavy-duty weather-resistant aluminum housing;
3.) One-wire installation, power and video via shared coax cable;
4.) Combines with existing TV channels, requiring no monitor;
5.) Infinitely adjustable with 360-degree horizontal and 180-degree vertical positioning;
Package Height x Length x Width: 14 in. x 14 in. x 10 in.
Package Weight: 3 lbs.
Audio Security Cameras